1、Whats the meaning of the white horizontal solid line in the circle?
A、Turning waiting line
B、Deceleration line
C、Yielding line
D、Stop line
Answer：D
2、When a tire blowout on the road, the driver should swiftly depress the brake pedal to reduce speed, do all his can to control the steering wheel and stop the vehicle as soon as possible.
A、Right
B、Wrong
Answer：B
3、How to do in this intersection?
A、Wait in the cross-hatched marking area
B、stop and wait outside the intersection
C、Follow the vehicle in front and pass
D、Wait inside the intersection
Answer：B
4、What is the meaning of this sign?
A、No U turn at intersection
B、No changing lane from both sides
C、No left or right turn
D、No going straight
Answer：C
5、The main impact of muddy roads on safe driving is that the wheels may easily spin and skid
A、Right
B、Wrong
Answer：A
6、What is the meaning of this sign?
A、No entry for bicycles
B、Lane for non-motorized vehicles
C、Special lane for bicycles
D、Bicycle stopping area
Answer：B
7、Serious wave will appear when the front tire blows out; the driver should release the accelerator, firmly hold the steering wheel with both hands, quickly gradually break down, and stop to yield.
A、Right
B、Wrong
Answer：A
8、It is illegal to change lanes without turning on indicators.
A、Right
B、Wrong
Answer：A
9、When a motor vehicle encounters a group of youngsters bypassing the motor vehicles parking beside the road, the driver should slow down voluntarily and yield.
A、Right
B、Wrong
Answer：A
10、When passing through a tunnel, the wrong measure is to ___________.
A、Keep safe distance when two vehicles cross each other
B、Driving with the low beam light
C、Use the hight beam light when two vehicles cross each other
D、Overtaking in the tunnel
Answer：CD
11、When driving on a long downhill road, which is the best way to control driving speed?
A、Coast in neutral gear
B、Depress the clutch and coast
C、Use the engine to brake
D、Depress the brake pedal continuously
Answer：C
12、What is the meaning of this sign?
A、Driving at reduced speed in the section of 40 meters
B、Minimum speed is 40km/hr
C、Maximum speed is 40km/hr
D、40km/hr speed limit ban is lifted
Answer：D
13、What is the meaning of this sign?
A、Sharp right curve
B、Bypass from right side
C、Continuous curves
D、Sharp left curve
Answer：A
14、The continuously flashing yellow light is to warn that the driver should look and make sure it is safe to pass.
A、Right
B、Wrong
Answer：A
15、When driving on a muddy roads, it is easy for wheels to sideslip or skid, which leads to traffic accidents.
A、Right
B、Wrong
Answer：A
16、Why is it dangerous to overtake on a snowy mud road in heavy snow?
A、Snow can increase tire adhesion
B、The flying mud made the sight bad.
C、Long braking distance in case of emergency
D、Pavement under snow and mud is easier to skid.
Answer：BCD
17、Under such circumstance at an intersection. motor vehicle drivers should be prepared to stop and yieldat any time.
A、Right
B、Wrong
Answer：A
18、Matches, sulfur and red phosphorus are _________.
A、Explosives
B、Inflammable solid materials
C、Self-igniting articles
D、Oxidizing materials
Answer：B
19、What is the most frequent problem for driving on a muddy road?
A、High resistance force
B、Sideways slide
C、The motor vehicle bumps
D、Steering failure
Answer：B
20、What is the meaning of this sign?
A、The lane for non-motorized vehicles
B、Yield non-motorized vehicles
C、No passing for non-motorized vehicles
D、Watch for non-motorized vehicles
Answer：D
21、Violent wind can cause a sideways swerve to a running vehicle.
A、Right
B、Wrong
Answer：A
22、Whats the meaning of this mark on the road?
A、The lane for non-motorized vehicles
B、The special lane for motorcycles
C、The special lane for battery bicycles
D、the special lane for bicycles
Answer：A
23、What is the meaning of this sign?
A、Reduce speed and go slowly
B、Watch for danger
C、Jammed section
D、Accident-prone section
Answer：B
24、What is the meaning of this sign?
A、Y-shaped intersection
B、T-shaped intersection
C、Intersection
D、Ring intersection
Answer：B
25、The drivers, loaders and supercargoes responsible for dangerous chemicals transportation should all full understand the chemical characteristics, potential risks, features of the packaging containers and emergency measures for any unexpected accidents.
A、Right
B、Wrong
Answer：A