1、Why is it dangerous to overtake on a snowy mud road in heavy snow?
A、Snow can increase tire adhesion
B、The flying mud made the sight bad.
C、Long braking distance in case of emergency
D、Pavement under snow and mud is easier to skid.
Answer：BCD
2、When driving on road sections where safe sight distance is affected, such as the top of a ramp, what should drivers do to ensure safety?
A、Rush through
B、Use hazard lamp
C、Cut speed and sound the horn
D、Drive at will
Answer：C
3、What should be checked before driving?
A、No parts need to be checked
B、Whether the tires have been cleaned
C、Where the spare tire is placed
D、The fastening and air pressure of tires
Answer：D
4、Matches, sulfur and red phosphorus are _________.
A、Explosives
B、Inflammable solid materials
C、Self-igniting articles
D、Oxidizing materials
Answer：B
5、When passing another vehicle on a foggy day, what should drivers do?
A、Slow down and pass slowly
B、Maintain a safety distance
C、Properly use lamps
D、Drive at a high speed
Answer：ABC
6、After setting off from a roadside, motor vehicle drivers should watch both sides of the road, turn left and drive into the normal lane slowly.
A、Right
B、Wrong
Answer：A
7、When a motorcycle reaches a muddy or burst-and-muddy section, the driver should stop, observe and select the level and solid section or the section with vehicle tracks.
A、Right
B、Wrong
Answer：A
8、Rescue personnel should check the breath of the unconscious person before applying any other emergency treatment.
A、Right
B、Wrong
Answer：A
9、When driving on a road covered with ice and snow drivers should not use the emergency brake but can apply a sharp turn.
A、Right
B、Wrong
Answer：B
10、When the driver discovers that steering is stiff, the wrong measure is to ___________.
A、Reduce speed and stop the vehicle as fast as possible
B、Stop at a safe place
C、Continue to drive
D、Identify the cause
Answer：C
11、When passing through a tunnel, the wrong measure is to ___________.
A、Keep safe distance when two vehicles cross each other
B、Driving with the low beam light
C、Use the hight beam light when two vehicles cross each other
D、Overtaking in the tunnel
Answer：CD
12、When driving on a long downhill road, which is the best way to control driving speed?
A、Coast in neutral gear
B、Depress the clutch and coast
C、Use the engine to brake
D、Depress the brake pedal continuously
Answer：C
13、What is the meaning of this sign?
A、More vehicles section
B、Passing slowly
C、Jammed section
D、Construction section
Answer：B
14、when passing an intersection without traffic lights, the driver finds people are crossing the street, the wrong measure for the driver to take is to __________.
A、Reduce speed or stop and yield
B、Honk to urge the pedestrians
C、Bypass
D、Weave through the pedestrians
Answer：BCD
15、While driving a motorcycle, it is permitted to keep one hand on the handlebar but not allowed two hands leave handle bars at the same time.
A、Right
B、Wrong
Answer：B
16、Serious wave will appear when the front tire blows out; the driver should release the accelerator, firmly hold the steering wheel with both hands, quickly gradually break down, and stop to yield.
A、Right
B、Wrong
Answer：A
17、Under such circumstances, the driver should stop the vehicle and yield to pedestrians.
A、Right
B、Wrong
Answer：A
18、Turning on the high-beam is an effective way to improve visibility in fog weather.
A、Right
B、Wrong
Answer：B
19、What is the meaning of this sign?
A、No yielding
B、Yield while crossing each other
C、Reduce speed and yield
D、Stop to yield
Answer：C
20、When the driver discovers a tire is leaking and steers the vehicle off the main carriageway, he should refrain from applying emergency so as to avoid a vehicle turnover or a rear-end collision arising from the late braking of the following vehicle.
A、Right
B、Wrong
Answer：A
21、When driving a motor vehicle into a traffic flow, drivers should not hold up other vehicles.
A、Right
B、Wrong
Answer：A
22、Which lamp should be turned on when motor vehicles pass through a road section at night where the street light condition is good?
A、Front and rear fog lamps
B、Low-beam
C、High-beam
D、Hazard lamp
Answer：B
23、Gun powder, explosives and detonating powder belong to which of the following dangerous chemicals?
A、Oxidizing materials
B、Inflammable solid materials
C、Explosives
D、Self-igniting articles
Answer：C
24、Dangerous chemicals possess the characteristics of explosion, inflammation, poison, erosion and radiation.
A、Right
B、Wrong
Answer：A
25、Before riding a motorcycle, the driver should wear a safety helmet and adjust the angle of the rearview mirror till he can clearly watch the left side and the right side of the back.
A、Right
B、Wrong
Answer：A