1、Max speed when pass the narrow road or bridge is _______
A、50km/hr
B、40km/hr
C、30km/hr
D、60km/hr
Answer:C
2、When the driver senses a tire blowout on the road, he should control the direction of the vehicle, gently depress the brake pedal to slowly reduce the speed and gradually park the vehicle steadily on the roadside.
A、Right
B、Wrong
Answer:A
3、In such road sections, you can enter the cross-hatched marking area to wait.
A、Right
B、Wrong
Answer:B
4、Whats the meaning of this sign?
A、right-turn lane
B、U turn lane
C、left-turn lane
D、straight-going lane
Answer:D
5、Whats the meaning of this sign?
A、location and distance
B、driving route
C、destination name
D、driving direction
Answer:A
6、What device does the switch of this symbol control?
A、the windscreen defrosting or defogging
B、the rear window wiper and washer
C、the windscreen wiper and washer
D、the rear window defrosting or defogging
Answer:C
7、When ignition switch is in the START position, the starter starts.
A、Right
B、Wrong
Answer:A
8、How to pass when encountering this situation at the intersection?
A、make sure it is safe to pass
B、turn right and speed up to pass
C、speed up and pass straight
D、turn left and speed up to pass
Answer:A
9、As thick fog reduces visibility, turning on the high beam light can increase the visibility.
A、Right
B、Wrong
Answer:B
10、Whats the meaning of this sign?
A、max speed
B、speed limit
C、speed recommended
D、mini speed
Answer:C
11、Whats the meaning of this sign?
A、electric bicycles may go
B、parking space for non-motorized vehicles
C、parking area for non-motorized vehicles
D、non-motorized vehicles may go
Answer:D
12、Do not start up a vehicle when the door or compartment is not properly closed.
A、Right
B、Wrong
Answer:A
13、Whats the meaning of this sign?
A、landslide section
B、construction section
C、factory ahead
D、jammed road
Answer:B
14、When overtaking a vehicle stopping on the right side, the driver should ________ in case that vehicle starts up suddenly or opens the door.
A、Speed up and pass
B、Keep honking
C、Maintain the normal speed
D、Keep a safe horizontal distance from that vehicle, reduce speed and pass
Answer:D
15、The double yellow solid lines in the middle of the road are used to separate the traffic flow in opposite directions, crossing the lines to overtake or make a turn is allowed if it is safe.
A、Right
B、Wrong
Answer:B
16、It lights to remind that engine needs to add oil.
A、Right
B、Wrong
Answer:B
17、When overtaking, the driver should ________ if the vehicle in front refuses to reduce speed or yield.
A、Follow closely and find chance to overtake again
B、Stop overtaking
C、Speed up and continue to overtake
D、Continuously honk and speed up to overtake
Answer:B
18、Stop and yield to the pedestrians under this situation.
A、Right
B、Wrong
Answer:A
19、This set of the hand signals of the traffic police indicates that the vehicles should ___ .
A、turn right
B、reduce speed and pass slowly
C、pull over
D、change lane
Answer:D
20、After a vehicle enters a mountain road, it should pay special attention to the continuous curves sign. In addition, it should voluntarily evade vehicles and pedestrians, reduce speed in a time manner and honk in advance.
A、Right
B、Wrong
Answer:A
21、The driving license of 10-year validity will be issued if the penalty points never reached 12 points in every scoring cycle during the 6-year validity of the license.
A、Right
B、Wrong
Answer:A
22、What kind of marking are the double yellow solid lines in the middle of the road?
A、auxiliary marking
B、warning sign
C、prohibitive marking
D、indicative marking
Answer:C
23、When reversing on an ordinary road and discovering some vehicles are passing, the driver should _________.
A、Honk to indicate the intention
B、Voluntarily stop and yield
C、Speed up and reverse
D、Continue to reverse
Answer:B
24、If a vehicle has the right of way at an intersection but encounters a vehicle cutting in, the driver should _________.
A、Rush to pass
B、Speed up in advance and pass
C、Reduce speed and evade, or stop to yield when necessary
D、Go forward at the normal speed according to the right of way and refuses to evade
Answer:C
25、When reaching an intersection, the driver should _____ if a turning vehicle cuts in.
A、Stop to evade
B、Maintain the normal speed
C、Speed up and pass ahead of it
D、Honk and pass ahead of it
Answer:A